Arado Ar-196A-3 Photo etch Sets and Decals

Published: May 31st, 2011     
Kitset packagings
Kitset packagings
Reviewed by: Rick Bellanger - IPMS# 35220
Scale: 1/32
Company: Eduard
Price: $33.00
Product / Stock #: See Text
Product provided by: Eduard

Since all the sets and decals mentioned above go to one aircraft model, I decided to combine all the reviews into one. Hopefully making it easier to follow. I will not review the Revell Ar 196A-3, but this has to be one of the nicest models I have ever built. The fit was very good with minimal putty required for the ever present (all model airplanes have it) nasty fuselage seam. Detail throughout is very nice but by adding the Eduard Photo Etch Sets greatly enhances an already outstanding model.

Interior:

I'll start with the interior sets. Set 32-691 is included in set 32-681. So you will not have to purchase both. Both are Self Adhesive. Included is a new instrument and radio panel. Also, side wall and canopy details. Gunner position details which have new boxes, ammunition container handles, and a barrel for the MG.

I tried to compare existing parts with photo etch enhanced parts. The existing parts are adequate but as you can see the end result using photo etch is real nice. The self-adhesives parts are a dream to work with. I used a #11 blade, cutting on a sheet of glass, to remove the small parts from their tree/fret/carrier whatever you may call it. The adhesives on the parts stops them from flying away as you cut them.

You will have to scrap the instrument panel and some of the radio panel flat to attach the photo etch parts. I painted everything before attaching any parts. The main panel is made up of two separate parts with several extra sheet added on top of these. After everything lines up it does make a very convincing and highly detailed instrument panel. Eduard even gives you a nice map and some navigation tools (divider, ruler, a so forth).

Eduard gives you a port and starboard side for the cockpit. These are flat panels that go on the interior bracing of the kit. I looked for reference photos but could not find any so I did as instructed. I do like the look and they were easy to install.

I purchased the seat belt set on my own and by looking at the photos you will know why. The model kit seat belt parts were terrible, molded directly to the seats, and since you adding nice detail to the cockpit you better do the seat belts too.

Exterior:

Moving to the exterior set. You get lift rings; tie downs and handles for the pontoons. Steps and step covers for the fuselage; brackets and cooling baffles for the engine and nose piece, and control arms for the elevator, rudder and ailerons. Also included are access panel interior details, which include baffles, handles and edge rivet details. You also get detail parts for the rudders on the pontoons. I just wish they would have included a diagram on how to rig the rudder parts. Not a bad set but a LOT of tiny parts and no extras if you lose one. Some were quite the pain in the tuckass to apply and stay put.

Canopy:

I purchased the canopy mask and I'm glad I did. There is a lot of glass in this model. Eleven parts make up the assembly. I first dipped everything in Future and set aside to dry for a few days. I wish Eduard would include interior and exterior masks, being in this large of scale, I think the framing has to be painted on the inside and outside. By being frugal and cheap, I used them twice. Since they are interchangeable you can use them for both interior and exterior. The right side exterior will fit the inside interior and so on. I painted the inside first then switched the masks to the exterior to paint that. The tape is good and I had no problems using it twice.

Decals:

Since this is a Revell from Germany kit, no Swastikas are included. I am not a German Aircraft WWII builder so I had no spare decals to use. CAM Decals has a very nice generic set that includes five different sizes in three different schemes each. So now I have plenty of decals. Thanks Ray.

Eduard has done a nice job in providing additional details to an already detailed kit. If you plan on building the Ar 196 I would highly suggest adding the photoetch sets to your shopping list. At the bare minimum include the interior set (#33-076) and seat belt set.

I would highly recommend these sets, but only to modelers that have some experience in dealing with SMALL photo etch parts and ACC glues.

Thank you IPMS USA for giving me the pleasure and opportunity to build and review these photoetch sets. Also a very strong thank you goes to Eduard for providing the samples to IPMS USA for our review. Another big thank you to Ray from CAM Decals for providing the decals I required.

  • Interior instructions, front page
    Interior instructions, front page
  • Interior instructions, back page
    Interior instructions, back page
  • Ar 196A-3 Interior S.A., 32-681
    Ar 196A-3 Interior S.A., 32-681
  • Kit interior parts
    Kit interior parts
  • Kit radio gear
    Kit radio gear
  • Painted interior parts completed
    Painted interior
  • Exterior instructions front page
    Exterior instructions front page
  • Exterior instructions back page
    Exterior instructions back page
  • Exterior, 32-267
    Exterior, 32-267
  • Seat Belts, 32-691
    Seat Belts, 32-691
  • Interior S.A. Mini, 33-076
    Interior S.A. Mini, 33-076
  • Canopy Mask, JX119
    Canopy Mask, JX119
  • Part 1, Swastikas, 32-A030
    Part 1, Swastikas, 32-A030
  • Close-up of radio and photoetch
    Close-up of radio and photoetch
  • Gunner/radio operator seat
    Gunner/radio operator seat
  • Finished instrument panel
    Finished instrument panel
  • Pilot seat
    Pilot seat
  • Interior installed
    Interior installed
  • Starboard float on completed model
    Starboard float on completed model
  • Port side view of rear position
    Port side view of rear position
  • Port wing-folding mechanism
    Port wing-folding mechanism
  • Port side forward airframe
    Port side forward airframe
  • Port side forward airframe
    Port side forward airframe
  • Starboard forward quarter view
    Starboard forward quarter view
  • Starboard aft cock[pit view
    Starboard aft cock[pit view
  • Portside forward cockpit
    Portside forward cockpit
  • Nose and engine from starboard side
    Nose and engine from starboard side
  • Nose and engine from port side
    Nose and engine from port side

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Allowed HTML tags: <a> <blockquote> <br> <cite> <code> <dd> <div> <dl> <dt> <em> <li> <ol> <p> <span> <strong> <ul>
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Non-latin text (e.g., å, ö, 漢) will be converted to US-ASCII equivalents (a, o, ?).

More information about formatting options

CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.