KAB-500L 500kg Laser Guided Bomb

Published: November 25th, 2016     
Product Image
Packaging
Reviewed by: 
Frank Landrus, IPMS# 35035
Scale: 1/72
Company: Advanced Modeling
Price: $7.95
Product / Stock #: 72075

Advanced Modeling, based in Chelyabinsk Russia, has jumped in to help 1/72 (and 1/48 as well as 1/32) model builders of modern Russian aircraft that include the Su-24M, Su-25TM, Su-25SM, Su-30MKI, Su-30MKK, Su-32, MiG-27K, and MiG-29SMT. This new release provides two KAB-500L 500kg laser guided bombs consisting of six resin parts. It also includes a photoetched fret consisting of two pieces for the rear end of the bombs and a well done waterslide decal sheet with black stencil markings.

Notable is the re-sealable packaging that Advanced Modeling uses that makes the parts easy to review and then stuff back into the package securely. Painting instructions are included with the instruction sheet, in this case calling out FS 26473 grey. The resin parts are well cast with no air-bubbles or any casting errors that I could spot on any of the resin parts.

You will want to be careful separating the rear resin fins from the casting block as their small size makes them easy to break. I would recommend using a fine tooth razor saw to remove the parts from their pour stubs. Assembling the resin parts is fairly easy, with the primary challenge being providing your own homemade mounting rod for the laser seeker head. I used a # 73 drill bit to drill a hole in the base of the nose and the target coordinator and then used a broken #73 drill bit to insert into both parts (a good reason to keep broken bits...). You will also want to take care to make sure the nose seats properly to the main missile body. The photoetch part looks great but will need a nice flat surface to seat properly.

Be sure to use your favorite CA (super glue) or epoxy, as the normal plastic glues or solvents will not react with the resin material. I used Tamiya Light Ghost Grey (AS-26) feeling is was close to the FS 26473 grey. If you check the internet, you can find the KAB-500L in a variety of greys, greens, and black. The greens and black paint jobs will require white decals though. Speaking of the decals, they are tiny, but they do appear to be accurate. I used both Solvaset and Mr. Mark Softer and had no problems with either in getting the decals to settle down well. After a flat coat, you're done. I still ended up with a couple silvering, but that's my fault.

I was very impressed with the detail in this 1/72nd scale kit. I was happily surprised that although the fins are very thin, they somehow survived my handling without any breakage. The great decals just sealed the deal. My thanks to Victory Models and IPMS/USA for the chance to review this resin set.

Highly Recommended!

  • Kit parts
    Kit parts
  • Kit contents
    Kit contents
  • Instructions page 1
    Instructions page 1
  • Instructions page 2
    Instructions page 2
  • Complete kit
    Complete kit
  • Complete kit
    Complete kit