LAV-25 Piranha

Published: August 28th, 2016     
Product Image
Box Art
Reviewed by: Phillip Cavender - IPMS# 50085
Scale: 1/35
Company: Italeri
Price: $27.99
Product / Stock #: ITAS6539
Product provided by: Hobbico

This kit by Italeri is a new release for 2016. The LAV-25 was developed in the 1980's in response to the LAV program which was started during the late 1970's. After several companies submitted their plans, General Motors of Canada was selected as the manufacturer for the Army and the Marine Corp. Later the Army withdrew their plans due to funding issues. The Marine Corp continued and eventually six variants of the LAV-25 were procured. This kit represents one of those variants: The LAV-25 with the 25mm M242 Bushmaster Automatic cannon. The LAV-25 I will be constructing represents the vehicle named "Croaker" from Charlie Company, 2nd LAI Battalion during Operation Desert Storm as seen in D'Angina, James, and Henry Morshead. LAV-25: The Marine Corps' Light Armored Vehicle. Botley, Oxford: Osprey, 2011. Print. Decals are provided for this version in the kit.

Let me preface my review by stating that as modelers we do not always follow the instructions step by step. We tend to skip around completing steps in advance while letting previous steps dry or bond. For this build and review, I did indeed skip steps, but I will describe what I found in each step, pros or cons, so the builder will be enlightened as to what needs addressed during the build.

Box

The box is a normal size 12-1/2" long x 9-1/2" wide x 2-1/4" tall with great graphics of the LAV-25 Piranha in action on a desert background. Contained within the box are three sprues all contained in a plastic bag and a small decal sheet for three different versions of the vehicle. The kit contains 207 parts estimated per ItaliaUSA's website on three dark yellow sprues lettered A, B and C and a large seven-page fold out instructional manual.

Sprues

Upon opening any model kit, what I like to look for is the amount of work, such mold relief tapers, flashing, ejector pin release points (recessed or elevated marks), mold shift points, sprue attachment points and mold seams that need to be addressed during construction. The plastic Italeri used for this kit seems to be very brittle. So when parts are cut from the sprues be extra careful. The parts have crisp detail with some flash. Upon inspection of the sprues some slight flash was seen, but not much. A few pin release points were seen which will have to be sanded or filled. The 25mm M242 Bushmaster main gun barrel is moulded in one piece with seam lines running down the middle which should be easily removed. There are no additional parts on the sprues that are not used. So BYE-BYE to extra stash parts.

Instruction Manual, Paint/Markings Guide, Decal Sheet

The instruction manual is printed in black and white measuring approximately 13"tall x 7-3/4" wide in portrait orientation. It contains ten steps on seven pages of clear uncluttered diagrams printed in black and white. The images for the steps also contain the paint color reference to be used. There is plenty of room for notations prior to or during the building stage on the sheet. The paint colors to be used are provided by Italeri in their reference number but, Federal Standard numbers are also listed for referencing other paint manufacturers. Italeri provides in the instruction manual three different versions of the LAV-25 with three different paint patterns and decals. All are described as: U.S.M.C., unknown unit, Saudi Arabia 1991 even though there are markings available for the "Croaker" in Charlie Company Operation Desert Storm, markings for "Steel Justice" of Delta Company in Operation Desert Shield and markings for "Known Distance" of C Company Operation Desert Storm.

The Build

  • Step 1 consists of construction of the wheel drive and suspension system assembly. Even though the LAV had steerable front four wheels, Italeri doesn't give you the option. With extensive re-work these could be made operational.
  • Step 2 consists of adding the rest of the suspension system, twin rudders, propeller shafts and propellers. Since these were small parts, I waited until I was ready to prime before adding so as not to break off the small parts.
  • Step 3 consists of construction of the interior troop compartment. Since I was not going to show the doors open I did not paint the interior as suggested by Italeri. If one does want to show the interior there are several ejector pin points that will have to be removed. Included in the interior compartment are the troop seats, fire suppression system and several tool boxes. The troop hatches are installed in step 5.
  • Step 4: This step consists of installing the upper hull, lower frontal plate and several other accessories which I did wait to install just before priming. As a note to the instructions in Step 4 the upper rear hull is incorrectly identified on the instruction sheet as 32A which in reality is part 32C.
  • Steps 5 and 6: Consist of installation of the rear troop hatches, towing and tie down lugs and other small parts. Note: All parts in Step 5 are labeled 10A on the instruction sheet. (See picture). Even with this curiosity all parts are easily identifiable as to placement. If the doors are shown open, then inside vision blocks are provided with inside door handles included.
  • Step 7: The only discrepancy noted in this step was that part 66A is incorrectly identified. It is located on sprue B (66B)
  • Step 8: Consists of installation of the wheels of which I had already pre-painted with Vallejo Model Color Iraqi Sand 70.819 and the rubber with Vallejo Panzer Aces 306 Dark Rubber.
  • Step 9: Consists of constructing the turret along with the main 25mm gun and other small parts. The main gun is workable being able to elevate or depress to a final position.
  • Step 10: Consists of attaching the turret to the hull which is made to swivel as desired.
  • Decals: The decals laid down nicely after a clear gloss acrylic coat was applied and allowed to dry for 24 hours. As I usually use Solvaset as my setting solution, I found no problem with the supplied decals. After the decals were allowed to dry for 48 hours I sprayed on another gloss clear acrylic coat to protect them during the wreathing process.
  • Painting: Model painted with Model Color Iraqi Sand 70.819. After this was allowed to dry the model was given a coat of Model Master Clear Gloss Acrylic. The decals were then applied using Solvaset. I saw no problems or silvering around the edges. After the decals were allowed to dry for 48 hours I sprayed on another gloss clear acrylic coat to protect them during the weathering process. The 7.62mm turret gun was painted with Ammo Mig Gun Metal 045. Periscopes painted with Tamiya X-23 Clear Blue. A pin wash using Vallejo Model Wash Oiled Earth 76.521 was then applied. Chipping was added using a sponge and Vallejo Model Color German Camo Brown 70.822. Rust to exhaust was added using Model Air Rust 71.080 with Mig pigments Standard Rust and Natural Iron Oxide. After this was complete a light coat of Model Wash European Dust 76.523 was sprayed on and dust pigments added to complete the model. Finally, a flat coat of Model Master Flat Acrylic was added to protect the model. As I always like to show my models in their natural surroundings, this model is sitting on a desert scene constructed of Vallejo Desert Sand Earth Effects over a 1/4" acrylic sheet attached to a wooden base.

In conclusion, this was an enjoyable build. At times frustrating because of all the mold seams. However, the detail was very good. As to accuracy I cannot say, but from pictures and references the accuracy seems to be spot on. The kit doesn't allow for the front four wheels to articulate which would have been a good option. However, this modification could be scratch built using reference pictures as a guide. The kit also doesn't supply the wire cutters normally mounted on the turret and hull but, as before these could be easily scratch built. As with most models, there are several aftermarket accessories available one could add to this kit. Finally, the call out numbers for Italeri Paints and the FS numbers were a welcome addition. I highly recommend this kit.

Thanks to IPMS/USA, Italeri and Hobbico for allowing me to review this kit.

  • Instruction sheet
    Instruction sheet
  • Step 5 error in instructions
    Step 5 error in instructions
  • Decal sheet
    Decal sheet
  • Sprue A
    Sprue A
  • Sprue B
    Sprue B
  • Sprue C
    Sprue C
  • Mold seams
    Mold seams
  • Undercarriage detail
    Undercarriage detail
  • Front top
    Front top
  • Front
    Front
  • Rear view
    Rear view
  • Right side
    Right side
  • Top rear
    Top rear

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Allowed HTML tags: <a> <blockquote> <br> <cite> <code> <dd> <div> <dl> <dt> <em> <li> <ol> <p> <span> <strong> <ul>
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Non-latin text (e.g., å, ö, 漢) will be converted to US-ASCII equivalents (a, o, ?).

More information about formatting options

CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.