Mike (Beach Boy) Barrington

Published: December 6th, 2018     
Product Image
Box Front
Reviewed by: Frank Landrus - IPMS# 35035
Scale: 1/24
Company: Master Box Ltd
Price: $14.95
Product / Stock #: 24044
Product provided by: Master Box Ltd

Master Box Ltd, out of the Ukraine, has been a leader in 1/35 figures for a while. They expanded into 1/24 female and fantasy figures in 2016, starting with their first series of six female figures representing the World War II era. This current series, Truckers, is ideal for modern Class-8 truck vignettes and dioramas. Mike (Beach Boy) Barrington is part of the first six kits in this series with more on their way.

The kit comes in a standard end opening box. Pulling out the parts, you will first see that the box is probably three times too large, but in return you get a nice painting on the cover by V. Petelin, and instructions on the back with color callouts in Vallejo, Lifecolor, Tamiya, and Mr. Color. I will note that the plastic figure sculpted by A. Gagarin is not identical to the cover paining, but it is very close. Figure represents a truck driver with his hands on the wheel. Packaging of the eleven parts are protected within a re-sealable bag.

I would recommend that you wash all the parts to remove any remaining mold release. There are small mold lines present on the parts, but they are easily cleaned up with sandpaper or a #11 scalpel blade. I used Tamiya Extra Thin cement and found it was just perfect for this kit. You get a choice of Mike Barrington wearing a baseball cap or a cowboy hat.

I began by cleaning up the few sprue attachments and the fine mold lines. Test fitting showed that overall part fit was going to be very good. The parts are broken down to enhance painting and minimize seams. I glued the two legs together but no putty was required for the join for a standard long-nose tractor. If you wish to use Mike Barrington in a Cab Over Engine (COE) design, you will need to adjust the spread of his legs to get them to fit. I played around a bit and modified his legs with putty till they would fit in a COE interior. I glued the torso together and then attached his head to his torso. I did have to use a bit of putty for the lower corners of the jacket to get the seam where they meet with the upper jacket to fit properly. Next up was to glue the arms on. You want to make sure you test fit the arms so they set correctly on your selected steering wheel. Keep in mind that older trucks used larger diameter steering wheels than current Class-8 tractors. I used a dab of reusable putty to hold either the baseball cap or the cowboy hat.

After that, it's all painting. One of the fun aspects of this kit is that you can paint him just about any way you wish. I base coated everything with Tamiya semi-gloss black (TS-29). I used Vallejo Model Air and Model Color paints throughout and had no issues (other than I need to learn to blend better). I painted his blue-jean jacket and pants Blue (71-004), followed by successive lighter blues to add texture and highlights. His shirt and baseball cap was painted Red (71-269) followed by a Transparent Red (70-934). All exposed skin was base coated with Medium Flesh (70-860), followed by dry brushing Flat Flesh [70-955]. I highlighted with Rosy Flesh (72-100) and Dark Flesh [70-927]. His upper and lower lips were painted Transparent Red (70-934). I painted a faint line on his eyes to simulate eyelashes. His hair and eyebrows were painted a German Red Brown (71-271 before dry brushing his hair with Transparent Red (70-934). for highlights. I used Green Shade Transparent Wash (73-205) on his lower face to help created the 'unshaven' look; Red Shade Transparent Wash (73-206) on the middle of his face; and Blue Shade Transparent Wash (73-207) above his eyebrows. I used an Umber Shade Transparent Wash (73-203) on his exposed arms. The cowboy hat was painted Saddle Brown (70-940) with an Umber Wash (73-203). The eyes were outlined in German Grey (70-995) followed by a streak of Aged White (71-132). The irises were painted USAF Brown (71-125) followed by German Grey (70-995) for the pupils. The watch wrist band was painted Gold (70-996).

There really isn't any way to screw this one up, and like the other figures in the series, he can enhance your 1/24 auto or truck vignette or diorama. I am looking forward to completing another kit in this series!

Highly Recommended

My thanks, of course, to Master Box Ltd for having the nerve to come out with this excellent figure and to IPMS/USA for giving me a chance to assemble and paint it.

  • Sample parts
    Sample parts
  • Sample parts
    Sample parts
  • Sample parts
    Sample parts
  • Completed figure front view
    Completed figure front view
  • Completed figure side view
    Completed figure side view
  • Completed figure with ball cap
    Completed figure with ball cap
  • Package front
    Package front
  • Package back & instructions
    Package back & instructions

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Allowed HTML tags: <a> <blockquote> <br> <cite> <code> <dd> <div> <dl> <dt> <em> <li> <ol> <p> <span> <strong> <ul>
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Non-latin text (e.g., å, ö, 漢) will be converted to US-ASCII equivalents (a, o, ?).

More information about formatting options

This question is for testing whether you are a human visitor and to prevent automated spam submissions.