Nakajima C6N1-S Night Fighter Saiun (Myrt) Limited Edition

Published: February 14th, 2018     
Product Image
Box Art
Reviewed by: Allan Murrell - IPMS# 49715
Scale: 1/48
Company: Hasegawa
Price: $64.99
Product / Stock #: HSGS7458
Product provided by: Hasegawa USA

Hasegawa has released this aircraft with components to make two Prototypes of the original developed reconnaissance aircraft modified for night fighter duty. One version with twin 20mm cannons and one with a single 30mm Cannon. There was only one of each built in June 1945 and both were used. There was no record of these being successful in service.

In the box is:

  • 6 x light grey sprues
  • 1 clear sprue
  • 1 decal sheet
  • 1 poly caps
  • Bag of metal parts (20mm Cannons)
  • 1 instruction booklet

While you get lots of sprues, you also get plenty of unused parts.

All the sprues are extremely well molded with very little flash and great detail; the decals allow you to finish the aircraft as the two variants different versions.


First is the construction of the cockpit which is well detailed although the addition of Seat belts either molded in or as parts would have been a great addition. The instructions call for a paint mix to achieve the interior color, I did not use this but instead used Tamiya XF71 which is very close to the color.

I choose to build the version with the single 30mm cannon as you need to decide this while building the cockpit.

The location of the 30mm gun and mounting parts is not very clear and takes putting the fuselage parts together in a dry build a couple of times to ensure it installs. The instrumentation decals need a lot of decal solution to get them to conform to the raised gauges in the parts.

The next stage is assembling the fuselage, cockpit, and wings. I did have some fit issues between the wings and fuselage and this needed filling and sanding.

The instructions have you cut the molded in navigation lights out and replacing them with provided clear parts. I actually used Kristal Klear as the parts seemed a little large for the locations.

Next is the engine and cowling build up this was very easy and simple and looks great when built.

Then the landing gear is assembled and then installed on the wings this was again very straightforward. You need to be careful aligning the landing gear when you install it.

The last two stages add the flaps, step, Propeller, and canopy etc.

The painting and decals were simple and easy to install.


This is an excellent kit from Hasegawa; I really enjoyed this build and subject.

Thanks go to Hobbico/Hasegawa for providing this kit to review and IPMS USA for allowing me to review it for them.

  • Decal sheet
    Decal sheet
  • Fuselage sprues
    Fuselage sprues
  • Sprues
  • Sprues
  • Upper wing sprues
    Upper wing sprues
  • Lower wing sprues
    Lower wing sprues
  • Clear sprues
    Clear sprues
  • Cockpit interior assembly
    Cockpit interior assembly
  • Cockpit interior assembly
    Cockpit interior assembly
  • Fuselage assembly
    Fuselage assembly
  • Fuselage assembly / cockpit
    Fuselage assembly / cockpit
  • Airframe assembly
    Airframe assembly
  • Painted model
    Painted model
  • Painted model
    Painted model
  • Finished model of Myrt
    Finished model of Myrt
  • Finished model of Myrt
    Finished model of Myrt
  • Finished model of Myrt
    Finished model of Myrt

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Allowed HTML tags: <a> <blockquote> <br> <cite> <code> <dd> <div> <dl> <dt> <em> <li> <ol> <p> <span> <strong> <ul>
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Non-latin text (e.g., å, ö, 漢) will be converted to US-ASCII equivalents (a, o, ?).

More information about formatting options

This question is for testing whether you are a human visitor and to prevent automated spam submissions.