Review Author
Jason Holt
Published on
September 6, 2016
Company
ICM
Scale
1/48
MSRP
$54.99

Sometime back in 2015 it was announced that ICM was going to produce a new 1/48 Ju-88 series kit. I was rather intrigued as the Ju-88 is one of my favorite aircraft of WWII and that the last time I actually built a Ju-88 was an old Hobbycraft kit back in the late 1980’s. Then sometime in the early 1990’s a new model company DML, later Dragon, came onto the market with a whole series of the Ju-88 family. At the time these were top notch kits but some of the engineering in order to produce a wide variety of variants made things slightly complicated for some, myself included. So with this announcement of a new Ju-88 kit coming out I was excited but at the same time very reluctant as my past experience with ICM not being favorable.

Review Author
Floyd S. Werner Jr.
Published on
September 6, 2016
Company
Twobobs Aviation Graphics
Scale
1/48
MSRP
$14.00

On the heels of the Aggressor unit, 65th FG, being disbanded the aircraft were farmed out to various units. One of those units that acquired the ‘used’ aggressor aircraft was the 194th FS in Fresno, CA. They traded in their F-16Cs for F-15s. The aircraft retained their aggressor paint schemes until they were repainted in the Mod Eagle scheme.

This sheet is contained in a ziplock bag. There are two full color pages printed on high quality paper in full color. The side view profiles are on the first page. This gives you the color callouts for three aircraft, one Mod Eagle, one in Flanker paint scheme, and one in Desert Eagle paint. The paint cross references for all three aircraft are included.

The other three sides of the instructions show the upper and lower plan views. Each aircraft has the color callout and cross reference with Testors, Humbrol, Gunze and Xtracrylic paint ranges.

Review Author
Floyd S. Werner Jr.
Published on
September 6, 2016
Company
Quickboost
Scale
1/32
MSRP
$3.75

The latest offering from Quickboost provides a one-piece supercharger intake. Packaged in a self-sealing package with a card stock support, this light grey resin intake is perfectly formed. The kit would have you build up the intake from two pieces meaning you’d have to fill the seam and then lose the raised welded detail Quickboost takes care of that for you. The inlet is deep enough to be convincing.

This time saver is worth the small price charged. The shape is accurate and all the detail is there with very little work. It is a drop in replacement for the kit parts. Simple, inexpensive, minimal work and accurate, all the hallmarks of the Quickboost line. This is another winner from them.

Highly recommended

Review Author
Dave Morrissette
Published on
September 6, 2016
Company
Iliad Design
Scale
1/72
MSRP
$12.00

I really like decals that represent historic moments in time and Iliad has released a set that is right up this alley with decals to represent four of the C-47’s that participated in the Berlin Airlift in 1/72nd scale. There are several kits available including Airfix and Italeri.

Inside the package, you get a single double sided sheet covering all the profiles of the planes which include:

  • Fassberg Flyer
  • C-47 in OD/Gray from Templehof
  • C-47 of European Air Transport Services in dull natural metal
  • C-47 from BOAC

The sheet has a very detailed description of the plane, its paint schemes and the details of its service. The back side of the page has top and bottom profiles describing the color of control surfaces and other details such as deicing boots. The decals are on a sheet with superb printing and include enough decals to do all four planes.

Review Author
Floyd S. Werner Jr.
Published on
September 6, 2016
Company
Furball Aero-Design
Scale
1/48
MSRP
$19.99

The F-14 has no shortage of kits in 1/48th scale and with the impending release coming from Tamiya the Tomcat will likely become a more popular model on the tables. The Tomcat is not a stranger to colorful markings. Furball Aero-Design has released another great sheet for the Tomcat.

The Air Wing All-Stars Part One has options for seven F-14As, all of them colorful. Typical of Furball decals the decals are sealed in a large ziplock bag. Inside the bag are the instructions printed in full color on three sheets of 8.5x11 high quality print stock. These instructions are easy enough to follow with no issues noted. All the aircraft have profile views of the left side and where there are differences between sides this is noted. Plan views are included on a side to themselves. The final sheet is designed just for the stencils and will be a great reference for the modeler.

Review Author
Floyd S. Werner Jr.
Published on
September 5, 2016
Company
Advanced Modeling
Scale
1/48
MSRP
$11.75

This has got to be the best time to be a modeler of modern Russian aircraft. I remember as a helicopter pilot in the Cold War, it was virtually impossible to find photos of aircraft let alone weapons systems. Advanced Modeling is the latest from the Russian manufacturers to represent missiles and bombs. This is the first time I’ve had the opportunity to review this company’s products. All I can say is wow!

Review Author
Floyd S. Werner Jr.
Published on
September 5, 2016
Company
Eduard
Scale
1/48
MSRP
$4.95

The Eduard Bf-108 has been around for some time and recently re-released. This little gem of a kit is a fun build and a very nice model.

There are limitations to things that you can do in plastic. In this instance the fine trailing edge of the prop blade can’t get be thinned enough. Well resin allows you to do a lot of things that plastic won’t. That is where this resin prop from Brassin comes in.

Packaged in a vacuformed container this set contains two pieces of resin. The resin is cast in light grey resin with no defects noted. The parts are the actual propeller blade and the nose cap. The key is the way Eduard casts their parts. I’ve found it to be very easy to remove and clean up.

There is also a sheet of decals for the prop blade logos.

The set is simple to add just drill a 2mm hole in the kit back plate and add the prop by threading the nose cap through the prop.

Review Author
Floyd S. Werner Jr.
Published on
September 5, 2016
Company
Master Model
Scale
1/72
MSRP
$7.50

In model aircraft, especially 1/72nd scale, the pitot tubes are very fragile. Limitations of plastic also means that they tend to be overscaled. Even being overscaled the pitot tubes are fragile. Then there is the trouble of the mold lines on the part and keeping them round while removing it. If you are like me that means I can’t do it justice, especially in this scale.

Protected by card stock backing, the parts are contained in a ziplock baggie. Inside of that baggie are two separate ones. One contains the turned metal parts and the other a piece of resin. Each brass piece is packaged separately. This means that you can’t get them messed up. The resin piece is a piece of art in itself. The light grey resin is simply gorgeous. The resin is protected by a foam capsule and the parts are held in place with tape that ensures it doesn’t get damaged. It is very tiny so care must be taken when adding the part to the turned metal barrel.

Book Author(s)
Kev Darling; Illustrator Richard J. Caruana
Review Author
Rob Benson
Published on
September 5, 2016
Company
Guideline Publications
MSRP
$20.18

This new Warpaint volume covers some of the last large seaplanes used in the world. Thank you to Guideline Publications for publishing an excellent work on these planes, and providing a copy for review. I am also very appreciative of the IPMS Reviewer Corps support, whose efforts make this review program so good.

Author Darling and Illustrator Caruana’s treatment of the Martin Mariner and descendent Marlin aircraft strikes an excellent balance of book size and detail. The content is laid out in a three-column text format, with two to three photos, data tables, or drawings per page. The color profiles show a beautiful variety of the marking schemes used by all operators of the aircraft with three aircraft per page. I found no historical inaccuracies, at least not from my limited expertise.

Review Author
Floyd S. Werner Jr.
Published on
September 5, 2016
Company
Quickboost
Scale
1/32
MSRP
$5.00
  • QB 32 176 - Fw-190D-9 Mimetall Gun Cover - $5
  • QB 32 177 - Fw-190D-9 Early Gun Cover - $5

The late war production machine in Germany required that many smaller manufacturers of parts be decentralized. As such a situation developed different manufacturers modified parts as necessary to ensure they meet production quotas. This is the situation with the FW-190D-9 forward cowlings and gun covers.

Packaged is a familiar self-sealing package, these gun covers are molded in light grey resin with no visible flaws. They are drop in replacement for the kit parts. Simply remove them from the resin pour stub and add to the model.