By Modelers... For Modelers
Banner 2 Banner 3 Banner 3 Banner 1

Porsche 962 Multimedia BBS Wheel Set

Published: January 1st, 2009     
Porsche 962 Multimedia BBS Wheel Set
Reviewed by: Doug Hamilton, IPMS# 21985
Scale: 1/24
Company: M & S Hobbies

Produced to fit the Tamiya Porsche 962 kit, this set contains four turned and polished aluminum wheels, cast white metal inserts, and a fret of photo-etched trim rings.  Assembly is a very straightforward affair that involves installing the centers into the rims, and attaching the trim ring to the center.  I recommend painting the center insert gold before installing them on the rims.  After the photo etched trim ring is added, a dark wash was used to give a little added depth.  The tires pressed on, and they were complete.  The center lug nut could be polished, or painted depending on the car you're modeling.  Check your references when deciding what to do with the nut.

Porsche 962 Decals

Published: January 1st, 2009     
Porsche 962 Decals
Reviewed by: Doug Hamilton, IPMS# 21985
Company: M & S Hobbies

The Porsche 962 was one of the most successful race cars ever produced. Being a customer based car, there were many teams that raced them at all the major tracks in Europe and the US. Every superlative fits this amazing car, and M & S Hobbies has chosen it as the basis for a series of decal sheets that will fit the Tamiya 962 kit. M & S also produces a transkit for the 962 that will enhance and accurize this kit, but that's the subject of another review!

I received three decal sheets in the series. There are two sheets for the #86 Bayside Disposal car, One in Budweiser markings and the other in Bridgestone markings. The third sheet is in #16 Dyson Racing livery. Produced by UMI for M & S Hobbies these sheets contain all the markings for the featured car. Theses decals are about the finest I've ever seen. They're extremely well printed and in perfect register. The colors are spot on to the actual cars according to my references and observations.

USN Super Carrier Decals

Published: January 1st, 2009     
USN Super Carrier Decals
Reviewed by: Charles Landrum, IPMS# 26328
Scale: 1/700
Company: Gold Medal Models

I would like to thank Loren Perry for this review sample and the decal photo.    

Until recently, ship modelers have had limited options for aftermarket decals. With the release of so many new ship kits, the demand for additional decal options has grown. While most manufacturers have focused on the etched-brass market, Gold Medal Models - one of the decal torch bearers as well as a PE manufacturer - has answered the call and released a decal sheet that covers the US Navy super carriers from CV(A)-59 on up. Not only will this sheet work with the new Trumpeter 1/700 NIMITZ Class, but also the classic Revell CVAN-65 ENTERPRISE, the venerable Monogram KITTYHAWK Class CV(A)s, the Italeri CV and CVN models and the Fujimi CV kits as well. 

Ferrari 126C2 - Long Beach 1982 - Part 1

Published: January 1st, 2009     
Ferrari 126C2 - Long Beach 1982 - Part 1
Reviewed by: Jack Kennedy, IPMS# 12511
Scale: 1/20
Company: Fujimi

This kit is Fujimi's second 1:20 scale Formula One Grand Prix racer. Their first was also a Ferrari 126C2 but from a different race in 1982. This particular car ran at the U.S. Grand Prix held at Long Beach, CA. The thing that makes this car different is the rear wing.

The G.P. at Long Beach required a high down force wing for the street circuit. The rules at the time stated that any piece of bodywork (wings included) behind the rear axle could be a maximum of 110cm wide but did not specify that this be measured from the center of the car, so Ferrari fitted two individual wings, one slightly ahead of the other, each 110cm. In the race Gilles Villenueve finished 3rd on the road but the race stewards later declared that this wing was illegal and the results didn't stand.

At first look, I was very impressed with the detail of the parts and the vast number of them. This looks like it will be an easy build. The instructions are very well illustrated and numbered so I don't foresee any problems with any part of the build. The decals are very sharp and crisp and include all the markings that were on the real car.

Ferrari 126C2 - Long Beach 1982 - Part 2

Published: January 1st, 2009     
Ferrari 126C2 - Long Beach 1982 - Part 2
Reviewed by: Jack Kennedy, IPMS# 12511
Scale: 1/20
Company: Fujimi

When I wrote the first part of this review, I briefly outlined the story behind this unusual race car. In this part I'll actually build the kit.

Upon opening the box I found 144 parts. All molded very crisply with fine detail. I didn't follow the instructions step by step as I was anxious to build the engine. This consisted of 44 parts. Assembly went very quickly with a terrific fit on all parts. Basically no cleanup was needed. When completed I primed it with Duplicolor Automotive light grey primer and then airbrushed with Duplicolor Silver. When this was dry, I gave the engine dark washes and a light drybrushing with bright silver. This really popped out the detail.

I think the engine is a standout on its own. I airbrushed the sub assemblies for the chassis and suspension with Model Master Flat Black and Silver. The assembly of the chassis was very simple and all parts fit nicely. The suspension was a bit tricky to get all lined up properly but with a little patience and trial fitting it all went together. I used CA glue on some of the parts that would require a solid hold and Tenax for the rest.

Recent Reviews

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer