FIRST LOOK North American P-51D Mustang

Published: July 8th, 2011     
Product Image
Box Art
Reviewed by: Dave Koukol - IPMS# 46287
Scale: 1/32
Company: Tamiya
Price: $168.00
Product / Stock #: 60322
Product provided by: Tamiya America

Considered by many to be the finest piston-engined fighter aircraft ever to take to the skies, the P-51 Mustang is legendary among aviation aficionados and modelers alike, and needs little introduction in this "first look" at Tamiya's exquisite rendition of the defining Mustang variant, the P-51D.

Riding on the tremendous popularity of its 1/32 Scale Aircraft series thus far, Tamiya once again ups the ante with the introduction of the P-51 series. As with their Zeros, Phantoms, and Spitfires, Tamiya has clearly engineered their tooling to crank out Mustang variants other than just the "-D."

Upon completion of the Spitfire Mk. XVIe a few weeks ago I seriously questioned if those show-off engineers and toolmakers at Tamiya could top the Spitfire series. Well, they may have done just that. Although I've had the kit for barely 8 hours, it's clear the engineering and layout of the kit bears much resemblance to that of the "Spit." Here's a breakdown of what's in the box:

  • 20 Styrene Sprues (16 gray, 3 clear, 1 black)
  • 2 Photo-Etch Frets
  • Vinyl Tires
  • 2 Sheets of Decals
  • 334thFighter Squadron, 4thFighter Group (box art)
  • 487thFighter Squadron, 352ndFighter Group
  • 79thFighter Squadron, 20thFighter Group
  • 1 Set of Masks
  • Hinge and Magnet Hardware
  • Phillips Screwdriver
  • 16-Page Color Reference Manual
  • Instructions (75 Steps, but who counts?)

The first 6 assembly steps focus on the powerplant. The Merlin, apparently borrowing tooling from the Spitfire and adding some Mustang-specific parts, is nothing shy of outstanding. After a brief diversion to the cockpit and fuselage assembly, engine oil and cooling assembly wraps up in only 5 more simple steps.

The cockpit is also a model unto itself with 12 steps of gray and clear styrene, photo-etch, and decals. The molded detail is crisp and appears accurate against references. Options for 3 instrument panels, 2 seats, and 2 gunsights are offered. A seated pilot option is also included.

Fuselage assembly accommodates selection of either early or later style tails, and spans 5 steps, to include integration of engine, cockpit, and radiator sub-assemblies. Surface detail is fine - almost sublime in places. Absolutely gorgeous! Not really sure where all the web forum flap about exaggerated rivet detail originated, but it's dead wrong. Fuselage and wing rivet detail is spot-on.

All control surfaces are hinged and positionable. Looks like 8 steps in all to assemble and integrate ruder, elevators, ailerons, and landing flaps. Early (fabric-covered) and late (metal covered) elevator options are included.

Wing assembly spans 8 steps, excluding control surface integration, and includes subassembly of the landing gear bay and .50-cal bays, and is followed by an exhaustive 7-step landing gear assembly process.

Construction and integration of external fuel tanks, gun bay doors, prop, canopy, engine cowling, and other fiddly bits account for the remainder of the build. As with the Spitfire, the removable engine cowl panels are apparently molded to scale thickness, and are attached by magnets built into the engine and airframe.

Decals appear to be typical of other Tamiya offerings, and of good color and register. As noted earlier, markings for 3 aircraft are included.

All said, I eagerly await this build, and am starting to sense the expectation that the satisfaction of this one may actually surpass that of the Tamiya Spitfire. Time will tell -- please stay tuned to this website for progress reports.

My sincere thanks to the good folks at Tamiya USA for providing this sample kit and to the IPMS Reviewer Corps Commandant for entrusting me with the build and review.

  • Box contents
    Box contents
  • Instructions, profile and bonus folder
    Instructions, profile and bonus folder
  • Decals, masks, and reference booklet
    Decals, masks, and reference booklet
  • Clear parts
    Clear parts
  • Ammunition belts
    Ammunition belts
  • Ammunition compartment covers
    Ammunition compartment covers
  • Cockpit floor and fuselage fuel cell
    Cockpit floor and fuselage fuel cell
  • Control surfaces, cockpit, and engine sprues
    Control surfaces, cockpit, and engine sprues
  • Engine parts on sprue
    Engine parts on sprue
  • Engine parts on sprue
    Engine parts on sprue
  • Starboard engine mount on sprue
    Starboard engine mount on sprue
  • Instrument panels and coamings
    Instrument panels and coamings
  • Radio gear
    Radio gear
  • Gun mount installations
    Gun mount installations
  • Fuselage close-up showing detail
    Fuselage close-up showing detail
  • Top outboard port wing detail
    Top outboard port wing detail
  • Botom portside wing center section
    Botom portside wing center section

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Allowed HTML tags: <a> <blockquote> <br> <cite> <code> <dd> <div> <dl> <dt> <em> <li> <ol> <p> <span> <strong> <ul>
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Non-latin text (e.g., å, ö, 漢) will be converted to US-ASCII equivalents (a, o, ?).

More information about formatting options

This question is for testing whether you are a human visitor and to prevent automated spam submissions.