USS Intrepid - Part 4

Published: March 22nd, 2015     
Product Image
Boxtop
Reviewed by: 
William Kluge, IPMS# 45849
Scale: 1/350
Company: Gallery Models
Price: $329.98
Product / Stock #: 64008

The Ship

Launched in April 1943 and commissioned four months later, USS Intrepid (CV-11) participated in numerous actions in the central and western Pacific from early 1944 until the end of the Pacific War, including Leyte Gulf and Okinawa. She was hit twice by kamikazes but was still on station at the end of hostilities. Intrepid underwent modernization twice during the 1950s, which enclosed her bow and gave her an angled flight deck. Reclassified as an Anti-submarine Carrier (CVS-11), Intrepid was the lead ship for the NASA's Mercury Aurora 7 and the Gemini 3 splashdown recovery. From April 1966 to February 1969, she made three deployments to the waters off Vietnam. She ended her active career back in the Atlantic and Mediterranean, being decommissioned in 1974 with over 30 years of service. In August 1982, Intrepid was reopened as a museum ship in New York harbor.

Part 4 - The Home Stretch

Once the hanger deck is in place, completion of the hull up to the flight deck level mostly involves adding all the catwalks, platforms and supporting structure underneath them. Here are a bunch of supports - a mix of plastic and PE. Considering the difficulty in reaching some of the catwalks and deck spaces after they are in place, I decided to paint the hull, then add the painted catwalks, going back and touching up paint where necessary. I also deviated from the construction sequence by attaching the flight deck after most of the hull construction was completed. I figured the need to fill and paint after the flight deck was put in place outweighed the risk of over-handling while attaching the flight deck.

All three elevators can be positioned either up or down. There are provisions in the kit to show some interior hanger deck/gallery deck structure if you choose to have the forward elevator lowered. The side elevators must be placed prior to attaching the flight deck. In retrospect, I should have left the safety nets off until last, as I had done with the majority of the deck-edge nets, as they were all too easy to break off with as much handling as the hull received before I was done with it.

There are several areas that needed some filling and extra sanding, both where the flight deck and where the hanger deck bulkheads attach. With that all done, it was on to the island.

The island presented some of the same challenges as the hull, with a number of attached galleries and catwalks. These were handled the same way, assembling the major portion of the structure, painting, then adding the painted decks and platforms. The aft portion was modified, eliminating the aft dome housing, modifying the platform and adjacent gallery, and scratch building a new radar antenna. The large SPS-49 radar array was replaced with an even larger SPS-43A array from GMM, and the support was modified to match the Hancock's. Intrepid's antenna suite included a few of the cone-shaped devices around the island, where Hancock at this time had a dozen or so, but being short of time at this point, I decided to do without and just use what was provided.

I thought I was nearly finished by the time I got to the PE railings and safety netting. Wrong again! There are a LOT of spaces for railings, and for all the railings that are included in the kit, I still needed to supplement the supply. The kit supplies two full frets of two- and three-bar rails. The majority of the kit's supply was used on the island and upper decks. Reference photos indicated that the rails at the hanger deck level were the chain or wire type, so I used a set of Eduard three-row "drooping" rails on the lower levels. Oddly enough, most of the kit PE was very easy to work with - thin but sturdy, but the railings presented some definite challenges, as every row cut from the fret had a marked tendency to curl and bow. The railings are paper thin, and each had to be carefully straightened. Not too difficult, but time consuming at a point where you thing you're almost done. Safety nets are provided for the flight deck bow and stern, as well as the side elevators. I robbed some elevator safety rails from a Gold Medal Nimitz set to finish off the PE application.

The final pieces and assemblies - island radar arrays, side sponson mounted antennas, whip antennas (made from stretched sprue, replacing the kit-provided PE antennas), anchors, etc. - were attached, and the model was weathered with pastel powder of various shades of grey and brown. In particular, the flight deck was heavily weathered, as photos indicated that Hancock was well worn at this point in her deployment. The aircraft and yellow gear were placed and surrounded by approximately 75 painted North Star figures. Again, reference photos indicated that a considerable number and variety of equipment, stores and containers were scattered about any available exterior deck space, so a collection of odds and ends was dredged from the spares box (including more carved-from-sprue drop tanks) and liberally scattered about to provide appropriate looking deck clutter. As for Tilley, all my scrounging of leftover parts and photo etch didn't turn up a representation of the crane truss that I felt was close enough in appearance to the real vehicle of the era. GMM includes a proper Tilley crane truss on its CVN Extra Details set, but I'd already sprung for an extra radar array, and wasn't inclined to purchase another full PE set just for one small bit. So, Tilley will just have to wait until Gallery or someone else releases a Vietnam era specific set of CV deck gear.

Sea Base

This base for Hancock represents another experiment. In order to give the surface more variation in wave height and depth along the ship's hull, I used a 3/8" thick piece of foam core board and stripped off one paper side. The water line hull shape was cut out, and the remaining rectangle of foam was glued to the baseboard, paper side down. Waves and troughs were sculpted into the foam with a heavy brush Dremel attachment. As expected, this created a lot of styrofoam dust, so the exhaust fan and vacuum cleaner were on throughout the process, and glasses or goggles, and a breathing mask are highly recommended. The sculpted styrofoam was primed with artist gesso, then painted with a custom mixed artist acrylic color in the same way as past waterline builds. The hull was then screwed on to the base through anchoring strips build into the hull when the bottom was cut. The bow wave was made from three pieces of thin mylar, cut to shape and painted with acrylic white paint and clear gel.

Modifications

  • Eliminate the stem anchor hawse opening by filing, filling and smoothing.
  • Leave off the fantail gun tubs, and reconfigure the attachment for the vertical drop-line lights.
  • Leave off the kit supplied, single starboard side communications pole antenna, and add two new, scratch built antennas and outriggers, one forward and one aft of the island.
  • Leave off the antenna dome housing at the aft end of the island. Modify the kit supplied antenna platform, and scratch build new radar antenna array.
  • Replace the kit supplied photo etch SPS-49 radar antenna with SPS-43A antenna (GMM).
  • Sand off the raised decal/photo etch placement scribe lines on the island for number 11 (both sides) and replace with 19 from the decal morgue. Modify the PE island number lights to match "19" vs "11".
  • Paint the flight deck to match that of Hancock during her 1965-66 Tonkin Gulf cruise. Some of the decal placement scribe lines on the flight deck were used as paint guides, but others were not needed. I opted to leave them in place and paint over them rather than try to fill them.
  • Create new decals for CVW-21 aircraft. Cut and fold the wings on the majority of the aircraft.

Conclusion

This is a terrific kit, highly detailed and well engineered. With very few exceptions, the parts fit is excellent. Although complex and involved, the kit has been designed to make assembly as easy as possible. My only nit to pic would be in the fiddliness or frailty of some of the photo etch parts, plus the obvious lack of floater net baskets and fuel hoses (I may yet go back and scratch build those). But, that is more than compensated by the quality and detail of what the kit does include (the aircraft alone are simply awesome. I just hope that separate sets will soon be available). This kit makes a fine representation of the Intrepid in her final form, and with a few modifications, can also be built to represent Hancock or Ticonderoga. Gallery may be planning their own versions of other upgraded Essex class carriers, but for now we finally have a Vietnam era Intrepid in 1/350, and it's a very good one, indeed.

Thanks to fine folks at MRC and IPMS for the opportunity to build and review this kit.

  • Aft view
    Aft view
  • Cat shot
    Cat shot
  • Flight deck aft
    Flight deck aft
  • Flight deck
    Flight deck
  • Forward view
    Forward view
  • Island detail
    Island detail
  • Island port side
    Island port side
  • Overhead view
    Overhead view
  • Port side
    Port side
  • Starboard elevator
    Starboard elevator
  • Starboard side view
    Starboard side view

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

question

hello, thank you for reviewing this kit and show us your exellent pictures. maybe you can tell me what deck tractors you used for this model and where i can buy it?

cu Georg

Post new comment

The content of this field is kept private and will not be shown publicly.
CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.
homepagelink